Comtrol’s RocketLinx ES7105 is an IEEE802.3af compliant PoE switch designed for a wide range of industrial PoE applications such as IP surveillance cameras, wireless access point, VoIP phone set, POS system, industrial sensors, controllers and security card readers, where a power source is not conveniently located.

The RocketLinx ES7105 is equipped with 4 PoE injector switch ports, with each port delivering power up to 15.4 watts, and one 10/100Base TX Up-link port transferring data to the central network. The RocketLinx ES7105 is compliant to the IEEE 802.3af Power over Ethernet (PoE) standard. The Power Over Ethernet technology can power up PoE enabled powered devices in full capability.

The ES7105 features convenient wiring with a standard industrial terminal block for the power and relay alarm contact output to alert of any port break or power failure. It also provides a DC jack for a traditional AC/DC power adapter.

Hardware

• Bus Interface Specification 10/100BASE-TX
• Enclosure IP-31 Grade Aluminum Metal Case
  
• Installation Panel Mount or DIN-Rail Mount
• LED Indicators Power, Power 1, Power 2
  Port Link/Activity Alarm
  PoE Status
• Dimensions 5.6" x 1.45" x 4.4"
• Product Weight 0.90 lbs

Technology

• Standards IEEE802.3 10BASE-T
  IEEE802.3u 100BASE-T
  IEEE802.3af Power Over Ethernet (PoE)
• Flow Control IEEE802.3x Flow Control and Back Pressure

Performance

• Switch Technology 3.2Gbps wire-speed non-blocking Switch Fabric
  Store and Forward Switch Technology
• Aggregate System Throughput 1.49Mbps
• Number of MAC Address 1K
• Packet Buffer Memory 512Kbits
• Transfer Packet Size 64 - 1552 Bytes

PoE Features

• Standards IEEE802.3af Power Over Ethernet
• Number of PoE Injector Ports 4
• Maximum Output Power/PoE Port (Max.) 15.4W @ VIN = 48VDC (IEEE802.3af mode)
• Standard PoE Voltage Output Yes. IEE802.3af compliant
  44-57VDC

Ethernet Specification

• Connector Type RJ-45
• Number of Ports 4 x 10/100Base-TX with PoE Ports; 1 x 10/100Base-TX (Uplink Port)
• Auto-MD/MDI-X Yes
• Auto-Negotiation Yes
• PoE Port Pin AssignmentTX (3, 6)
  RX (1, 2)
  V+ (4, 5)
  V- (7, 8)
• Ethernet Cable Type 10Base-T; CAT-3, CAT-4, CAT-5, CAT-5e, CAT-6
  100Base-T; CAT-5, CAT-5e, CAT-6
• Link Distance 100 Meters
• Port Alarm Relay Yes. Alarm Relay for Port Failure Notification
  (Enabled/disabled via DIP switch)
• Relay Rating 1A Max. @ 24VDC

Electrical Specifications

• Device
  • DC Input Voltage 48VDC
  • 7-Watts
  • Power Consumption (with PD Load)70-Watts
• Power Connector
• Power Connector Type (1) 6-Pin Screw Terminal Block
  (1) DC Jack
• Power Input Redundancy Dual Redundant Independent Power Inputs
• Reverse Polarity Protection Yes
• Power Alarm Relay Alarm for power failure notification
  (Enable/disable via DIP switch)
• Relay Rating 1A Max. @ 24VDC

Environmental Specifications

• Air Temperature
  • System On -20° to 70° C
  • System Off -40° to 80° C
• Operating Humidity (non-condensing) 0% to 95%
• Storage Humidity (non-condensing) 0% to 95%
• MTBF (Mean Time Between Failures)59.11 years

Export Information

• Packaged Shipping Weight 1.3 lbs
• Package Dimensions 8.8" x 2.5" x 7.7"
• UPC Code 7-56727-32045-6
• ECCN 5A991
• Schedule B Number 8517.62.0050

Regulatory Approvals

• Emissions Canadian EMC Requirements
  ICES-003
  European Standard EN55022
  CISPR 22
  FCC Part 15 Subpart B
  Class A limit
  
• Immunity European Standard EN55024:
  IEC 1000-4-2/EN61000-4-2: ESD
  IEC 1000-4-3/EN61000-4-3: RF
  IEC 1000-4-4/EN61000-4-4: Fast Transient/ Burst
  IEC 1000-4-5/EN61000-4-5: Surge
  IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
  IEC 1000-4-6/EN61000-4-8: Magnetic Field
  
• Safety IEC 60950/EN60950 (LISTED)
  CSA C22.2 No. 60950/UL60950 Third edition
  
• Other Regulatory Approvals