 |
 |
 |
 |
The IOLB-8008 is an IO-Link Block (Class A) with Digital Inputs that acquires binary control signals from the process level, and then transfers them (electrically isolated) to the controller. The status of the signal is displayed by LEDs and the signal connection is made through M8 connectors. The sensors are supplied from US1, which is derived from L+.
The small IOLB-8008 form factor (H126 x W30 x D26.5 mm) means that they are suitable for use where space is at a premium. The small mass of the IOLB-8008 module facilitates applications with mobile I/O interface, for example, a robot arm.
The robust design of the IOLB-8008 module enables them to be used directly at the machine. Control cabinets and terminal boxes are now no longer required. The module is fully sealed and therefore ideally prepared for wet, dirty or dusty conditions (IP67).
Pre-assembled cables significantly simplify IO-Link and signal wiring. Very few wiring errors are made, so that commissioning is optimized. In addition to pre-assembled IO-Link, power and sensor cables, field-configurable connectors and cables are available for maximum flexibility. Sensors and actuators are connected through M8 connectors.
Includes:
- IOLB-8008
- X1 protective cap
- Channel labeling tabs
Hardware
- Communication InterfaceIO-Link
- EnclosureIndustrial housing PA6 (polyamide)
- Ingress Protection RatingIP65, IP66, IP67 (conforms to EN 60529)
- Ports1 – IO-Link Class A
8 – Digital Inputs
- Connector Type (IO-Link)M12, 5-poles, A-coded (Male)
- Connector Type (Digital Input)M8, 3-poles, A-coded (Female)
- Connector ContactsPlated CuZn
- Mounting MethodMachine or panel mount
- Mounting MechanismTwo mounting holes on the product for M3 screws
- LED IndicatorsIO-Link Communication status, Power Input L+, Digital Input Signal status
- Dimensions (L x W x H)126 x 30 x 26.5 mm
5“ x 1.2“ x 1“
- Product Weight160 g
5.6 oz
- Shipping Weight200 g
7.2 oz
Electrical Specifications
- Operating Voltage18 – 30VDC
- Nominal Voltage24VDC (-15% / +20%)
- Supply for Module ElectronicsL+ (Pin 1, 3 on IO-Link Connector X1)
- Current Consumption (Module Electronics)100mA from L+
IO-Link Communication Specifications
- CommunicationIO-Link
- Operating ModeCOM3 (230.4 Kbps)
- StandardIEC61131-9 (IO-Link v1.1)
- IO-Link Device ID8008 (decimal)
00 1F 48 (hex)
- IO-Link Connector1 x M12, 5-poles, A-coded
- Specification VersionIO-Link V1.1
- IODD FilesYes
- FeaturesData storage
- Process Data Input (PDI)1 Byte
- Process Image8 Input bits
Digital Input Specifications
- Number of Inputs8
- Input Connectors8 x M8, 3-poles, A-coded (Female)
- Input Filter (Adjustable)3.0 ms (default)
Adjustable between 0 ms and 20 ms
- Input Signal Extension Time (Adjustable)0 ms (default)
Adjustable between 0 ms and 100 ms
- "0" Signal Voltage-3 to +5V (EN 61131-2, Type 3)
- "1" Signal Voltage+11 to +30V (EN 61131-2, Type 3)
- Input CurrentTypically 3mA (EN 61131-2, Type 3)
- Sensor SupplyUS1 (derived from L+)
- Sensor Current ConsumptionMaximum 0.5A Total, Short-Circuit Proof
Environmental Specifications
- Operating temperature-25°C to +60°C
- Storage temperature-40°C to +85°C
- Operating humidity10% to 95%
- Storage humidity10% to 95%
- Shock and VibrationsEN 60068-2-6
EN 60068-2-27
Regulatory Approvals
- EmissionsEN 61000-6-4
International Standard IEC 61000-6-4
- ImmunityEN61000-6-2
International Standard IEC 61000-6-2
- Safety ApprovalsUL508
- OtherIP65, IP66, IP67 (conforms to EN 60529)
2011/65/EU (RoHS2) Directive
- Approvals
  
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 8 point Digital Input IO-Link Block (Class A)
- 8 - M8 connectors
- Input voltage or current
- IP65/66/67
- Parameterization using IO-Link for easy installation and configuration
- Data Storage capable for easy device replacement
- IODD files
|
|
 |
 |
 |
 |

|